Skip to content

How to Setup Pro Dynamic DNS

Article Summary

  • With Pro, you can use No-IP hostnames or your own custom domain; custom domains need extra steps.
  • For a custom domain, create a zone before creating DNS records or configuring Dynamic DNS.
  • Point your domain to No-IP's nameservers; if they do not match, select 'No-IP Plus Defaults' and click 'Set Nameservers'.
  • If you use a No-IP domain, skip to the Managing DNS Records section.
  • Add records from DNS Records by clicking Add Record, choosing the host type and name, then clicking 'Add Hostname'.

The purpose of this guide is to provide you with general instructions for configuring Pro Dynamic DNS. With Pro, you can use No-IP provided hostnames for DDNS or your own custom domain. If you do not own a custom domain and would like to purchase one, please visit our domain registration page.


Setup with a custom domain is going to take a few extra steps. You will need to create a zone and point your domain to our nameservers. If you are using Pro with a No-IP domain, you can skip to the Managing DNS Records section.

Creating a Zone

You must create a zone before creating DNS records, or configuring Dynamic DNS on a custom domain.
To create a zone:
  1. Login to No-IP and navigate to the Zones & DNS Records page.

  2. Click on “Create Zone” and enter your domain name.

  3. Click on the more options icon.

  4. Select Delete Zone. You can now create a zone for a different domain.

  5. Login to No-IP and navigate to the Domain Management page.

  6. Click “Actions” then “Configure“.

  7. At the bottom of the page you will see the nameservers that are currently set. They should match the No-IP nameserver list provided below. If they do not, click the nameserver set dropdown and select “No-IP Plus Defaults“.

  8. Confirm your changes by clicking on “Set Nameservers“

  9. Login to No-IP

  10. Click DDNS & Remote Access on the left side of the page

  11. Click DNS Records

  12. Click Add Record for your domain

  13. Select your host Type and add a name for the host. 

  14. Enter the IP Address/Target (Your current network’s IP address will be prefilled)

  15. Click “Add Hostname”

  16. Login to No-IP

  17. Click DDNS & Remote Access on the left side of the page

  18. Click DNS Records

  19. Click the record you want to edit.